Products
All categories
Spiral drill collar★钻铤
Drill collar
普通钻铤
The drill collar is mainly used to provide bit weight to drill bit so that drill pipe is in tension. Especially drill collar can keep drill bit centralized and hole track by large rigidity. MS brand drill collar are manufactured strictly from API Spec.7 and SY5144 standard.
Materials:
Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available.
Trepanning and Heat Treatment:
Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface.
Traceability:
Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.
Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.
Cold Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.
Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.
Slip Groove, Elevator Groove and Size:
Huanjie offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines.
Thread Protectors:
Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
Technical specification and parameters
|
Drill Collar Number |
O.D. |
I.D. |
Length |
Bevel Diameter |
Refbend g Strength ratio |
||
|
mm |
in |
mm |
in |
||||
|
NC23-31 |
79.4 |
3 1/8 |
31.8 |
1 1/2 |
9150 |
76.2 |
2.57:1 |
|
NC26-35(2 3/8 IF) |
88.9 |
3 1/2 |
38.1 |
1 1/2 |
9150 |
82.9 |
2.42:1 |
|
NC31-41(2 7/8 IF) |
104.8 |
4 1/8 |
50.8 |
2 |
9150 |
100.4 |
2.43:1 |
|
NC35-47 |
120.6 |
4 3/4 |
50.8 |
2 |
9150 |
114.7 |
2.58:1 |
|
NC38-50(3 1/2 IF) |
127.0 |
5 |
57.2 |
2 1/4 |
9150 |
121.0 |
2.38:1 |
|
NC44-60 |
152.4 |
6 |
57.2 |
2 1/4 |
9150&9450 |
144.5 |
2.49:1 |
|
NC44-60 |
152.4 |
6 |
71.4 |
2 13/16 |
9150&9450 |
144.5 |
2.84:1 |
|
NC44-62 |
158.8 |
6 1/4 |
57.2 |
2 1/4 |
9150&9450 |
149.2 |
2.91:1 |
|
NC46-62(4IF) |
158.8 |
6 1/4 |
71.4 |
2 13/16 |
9150&9450 |
150.0 |
2.63:1 |
|
NC46-65(4IF) |
165.1 |
6 1/2 |
57.2 |
2 1/4 |
9150&9450 |
154.8 |
2.76:1 |
|
NC46-65(4IF) |
165.1 |
6 1/2 |
71.4 |
2 13/16 |
9150&9450 |
154.8 |
3.05:1 |
|
NC46-67(4IF) |
171.4 |
6 3/4 |
57.2 |
2 1/4 |
9150&9450 |
159.5 |
3.18:1 |
|
N50-67(4 1/2 IF) |
171.4 |
6 3/4 |
71.4 |
2 13/16 |
9150&9450 |
159.5 |
2.37:1 |
|
NC50-70(4 1/2 IF) |
177.8 |
7 |
57.2 |
2 1/4 |
9150&9450 |
164.7 |
2.54:1 |
|
NC50-70(4 1/2 IF) |
177.8 |
7 |
71.4 |
2 13/16 |
9150&9450 |
164.7 |
2.73:1 |
|
NC50-72(4 1/2 IF) |
184.2 |
7 1/4 |
71.4 |
2 13/16 |
9150&9450 |
169.5 |
3.12:1 |
|
NC56-77 |
196.8 |
7 3/4 |
71.4 |
2 13/16 |
9150&9450 |
185.3 |
2.70:1 |
|
NC56-80 |
203.2 |
8 |
71.4 |
2 13/16 |
9150&9450 |
190.1 |
3.02:1 |
|
6 5/8 REG |
209.6 |
8 1/4 |
71.4 |
2 13/16 |
9150&9450 |
195.7 |
2.93:1 |
|
NC61-90 |
228.6 |
9 |
71.4 |
2 13/16 |
9150&9450 |
212.6 |
3.17:1 |
|
7 5/8 REG |
241.3 |
9 1/2 |
76.2 |
3 |
9150&9450 |
223.8 |
2.81:1 |
|
NC70-97 |
247.6 |
9 3/4 |
76.2 |
3 |
9150&9450 |
232.8 |
2.57:1 |
|
NC70-100 |
254 |
10 |
76.2 |
3 |
9150&9450 |
237.3 |
2.81:1 |
|
8 5/8 REG |
279.4 |
11 |
76.2 |
3 |
9150&9450 |
266.7 |
2.84:1 |
WRITE A MESSAGE TO US
Contact Us
Our mainly products: drilling rig parts, drilling equipment, solid control system, wellhead equipment, fishing tools, cementing tools.
You are welcome to consult us!
+86-513-87635480 
Emial 
Copyright © 2021 Rugao Yaou Import & Export Co. LTD. All rights reserved. 苏ICP备06033218号 by:www.300.cn
