Products
All categories
vacuum degasser
Brife Instrcution:
Model-ZCQ vacuum degasser is a special-purpose device for the treatment of gas-cut drilling fluid. It is a new type one we have designed and developed by combining different sorts of degassers from home and abroad. It’s applied to match to various mud purification system. It is very important for returning mud gravity, stabilizing mud viscosity and reducing drilling cost. Also, at the same time it can be used as a heavy-power agitaor during the operation of gas free mud.
Operation Drinciple:
This degasser belongs to a kind of vacuum. One which uses the suction of the vacuum pump to establish an under balanced pressure area in the vacuum cylinder and causes the drilling fluid into the hollow shaft of the rotator through suction pipe under the atmosphere pressure, and then lets the fluid spray to the walls of the cylinder from the windows on the hollow shaft, now the gas bubble cut in the mud may break and run off in the funtcion of vacuum pump suction to a safe ara due to the fluid collision and bubble separator. However, the mud will enter the drainage cavity forced by its self-weight and pass the ratator and discharge off the cylinder.In addition ,drilling mud can enter the pump cylinder only through the suction pipe, and can’t be sucked in through the discharge pipe because the vacuum pump and the master motor are started simultaneously and the rotator connected to the motor will relolve at a high relolution speed too.
Technique parameters:
Specfication |
ZCQ(N) |
ZCQ(N) |
ZCQ(N) |
ZCQ(N) |
ZCQ(N) |
Capacit(m3/h) |
240 |
270 |
300 |
360 |
360 |
Vacuum degree(mmHg) |
300-340 |
400-550 |
400-550 |
400-550 |
400-550 |
Gear ration |
1.67 |
1.68 |
1.68 |
1.72 |
1.72 |
Main engine power (KW) |
15 |
22 |
30 |
37 |
37 |
Power of vacuum pump (KW) |
2.2KW-4 |
2.2KW-2 |
4KW-4 |
5.5KW-4 |
11KW-4 |
Speed(r/min) |
876 |
870 |
880 |
860 |
860 |
Displacement (m3/h) |
28 |
48 |
90 |
180 |
360 |
mud weight(g/cm3) |
≤2 |
≤2 |
≤2.5 |
≤2.5 |
≤2.5 |
degassing efficiency (%) |
≥90 |
≥90 |
≥90 |
≥90 |
≥90 |
Weight(kg) |
1200 |
1200 |
1800 |
2500 |
2600 |
Dimension(mm) |
1750×765×1510 |
1950×1010×1680 |
2250×1235×1650 |
2400×1500×1900 |
2450×1500×1900
|
FCQ series Vacuum Degasser is a special-purpose device and a new type one for the treatment of gas-cut drilling fluid. It can get rid of the various gas of invasive drilling quickly. It is very important for returning mud gravity, stabilizing mud viscosity and reducing drilling cost. Also, at the same time it can be used as a heavy-power agitator and supported applicable to all types of mud circulation purification system. The type of equipments belong to vaccum degasser, design of the structure is scientific and rational. So we are able to achieve an effective gas-liquid separation, filter out impurities and to ensure that the exhaust pipe has always been smooth.
Main Technical Parameters
Model |
FCQ700 |
FCQ800 |
FCQ900 |
FCQ1000 |
Main diameter |
700mm |
800mm |
900mm |
1000mm |
Capacity |
≤240 m3/h |
≤270 m3/h |
≤300 m3/h |
≤360 m3/h |
Vacuum |
-0.030~-0.045MPa |
-0.030~-0.050MPa |
-0.030~-0.055MPa |
-0.040~-0.065MPa |
Ratio |
1.68 |
1.68 |
1.68 |
1.72 |
Efficiency |
≥95% |
≥95% |
≥95% |
≥95% |
Motor power |
15kW |
22kW |
30kW |
37kW |
Vacuum power |
2.2kW |
3kW |
4kW |
7.5kW |
Rotary speed |
860/r/min |
870/r/min |
876/r/min |
880/r/min |
Dimension |
1750×860×1500 |
2000×1000×1670 |
2250×1330×1650 |
2400×1500×1850 |
Weight |
1100kg |
1350kg |
1650kg |
1800kg |
WRITE A MESSAGE TO US
Contact Us
Our mainly products: drilling rig parts, drilling equipment, solid control system, wellhead equipment, fishing tools, cementing tools.
You are welcome to consult us!
Copyright © 2021 Rugao Yaou Import & Export Co. LTD. All rights reserved. 苏ICP备06033218号 by:www.300.cn